Initio I/O HIGHWAY User Manual download pdf (Page 33)

initio

Updating the Initio Windows 95B (OSR2) Device Driver

1 Once a Windows 95 session is established, select MY COMPUTER from your desktop.

Execute the following steps:

 Select CONTROL PANEL from within the MY COMPUTER group

 Select SYSTEM from within the CONTROL PANEL group

 Select the DEVICE MANAGER tab from within the SYSTEM group

 Select the SCSI CONTROLLERS category from within the DEVICE MANAGER listing

 Select the Initio INI-9XXXU/UW PCI SCSI Host Adapter sub-categories from

within the SCSI CONTROLLERS listing (or any other INI-9100U/UW class of drivers if

you are using an older Initio product)

2 In the INI-9XXXU/9XXXUW SCSI HOST ADAPTER PROPERTIES window, select the

DRIVER tab, then select UPDATE DRIVER...

 Select Next

 Select the OTHER LOCATION

 Type A:\WIN95, then select OK

 Select FINISH

 At promptInsert Disk labled INI-9XXXU/9XXXUW driver , select OK

 At prompt Copying file, replace the highlighted directory path with A:\Win95,

then select OK. This will complete loading the INI910U.MPD driver onto your hard

disk drive.

This completes updating the Host Adapter Driver. Follow the on-screen directions to

restart you computer and activate the new driver.

It is highly recommended that you verify Initios Windows 95 device driver by selecting

MY COMPUTER from the desktop. Then select CONTROL PANEL:

 Select SYSTEM from within the CONTROL PANEL group,

 Select DEVICE MANAGER from within the SYSTEM group,

 Select SCSI CONTROLLER from within the DEVICE MANAGER listing, and

 Select the Initio INI-9XXXU/UW PCI SCSI Host Adapter entries from within the

SCSI CONTROLLER listing. If This device is working properly is displayed on

your screen, the driver has been correctly installed.

Microsoft Windows 95/95b (OSR2) Driver Installation

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 61 62

No comments

Initio I/O HIGHWAY User Manual Page 33