Initio I/O HIGHWAY User Manual download pdf (Page 26)

initio

/X0 This will exclude ALL drives on Host Adapter 0.

SAMPLE CONFIG.SYS

These samples assume that the user has loaded the Initio drivers in the following

directory: c:\iniaspi.

Config.sys:

DEVICEHIGH=c:\iniaspi\aspi910u

DEVICEHIGH=c:\iniaspi\inicd.sys /R2

Explanation:

The first line loads the ASPI manager and the second line loads the SCSI disk driver

specifying that a minimum of two drive letters be reserved for each MO and removable

disk attached to the SCSI bus.

ASPI Partition & Format Utility

INIFDISK.EXE is a DOS ASPI partition and format utility. It requires the ASPI910U.SYS

and INIDISK.SYS drivers to be loaded in order for it to function properly. INIFDISK.EXE is

installed by the Initio DOSSETUP or SETUP programs. Upon invocation, the initial

screen will have two windows. The top window will list all of the SCSI devices installed in

the system. The user can highlight a particular device by using the up and down arrow

keys. The bottom window will display information about the device that is currently

highlighted in the top window. Inifdisk.exe can partition and format any SCSI storage

device that is not being controlled by the BIOS, this includes SCSI disks, magnetic

optical drives, and removable media devices. INIFDISK will display two screens in which

the bottom portion will explain all commands possible in the top window.

MS-DOS/Windows 3.1x Driver Installation

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 61 62

No comments

Initio I/O HIGHWAY User Manual Page 26